您现在的位置:首页>技术标准>高耐磨油淬多元合金钢衬板
高新技术    高端品质
    “鼎基”牌衬板所采用的标准耐磨材料技术,代表了国内行业领先水平,引领衬板技术进入更高层次。超凡品质,处处辉耀着鼎基耐磨衬板技术的光芒。
The lining of "Dingji" brand is used by the liner wear-resistant materials technology,represents the domestic industry leading level and lead lining technology to higher level.
高耐磨油淬中合金钢衬板
    组织引进、消化、吸收日本先进技术和现代制造工艺,将高耐磨性,良好韧性集于一身,主要技术指标达到和超过日本同类产品技术水平,其技术性能适应Φ4m以上大型球磨机衬板材料。其耐磨性为高锰钢的3~6倍,一仓衬板使用3~4年。
Organizing introduction, digestion and absorption of Japan's advanced technology and modern manufacturing technology, high wear resistance and toughness is combined very well,the main technical index has reached or surpassed the level of technology similar products of Japan, the products can be used to above Φ4m large ball mill liner material. And its wear resistance is Steel 3to6 times of high Manganese,a warehouse Liner can be used 3to4 years.
序号No.
种类
Kinds
牌号
Designation
化学成份Chemical Composition(%)
机械性能
金相组织
C
Cr
Mn
Si
Mo
Re
Ti
S
P
aK
(J/cm2)
HRC
1
多元中合金钢衬板
ZG42Cr2MnSi2MoRE
0.38~0.48
2.0~2.6
0.8~1.2
1.5~1.8
0.2~0.5
0.05~0.08
0.02~0.1
≤0.04
≤0.04
40~85
50~56
M+A+B
M-马氏体Martensite    A-奥氏体Austemitic    B-贝氏体Bainitic